YQC zeolite rotor RCO is suitable for treating VOCs with large air volume and low concentration. After passing through the zeolite rotor, due to the van der Waals force between the molecules, the VOCs are adsorbed by the zeolite micropores, and the purified gas can be discharged to the exhaust pipe directly. The organic matter adsorbed on the zeolite rotor is then desorbed by the gas at a temperature of 180℃～200℃. The adsorbed high concentration waste gas is then sent to RCO furnace for catalytic combustion treatment. SEED specializes in manufacturing zeolite rotor RCO.

A condensation recovery system is a device commonly used in the chemical and pharmaceutical industries to recover and separate gases by condensing gases, such as steam, into liquids in a device through cooling and condensation methods. Its main function is to manage gases containing harmful gases or pollutants, and it is widely used in industrial environments such as chemical and pharmaceutical industries. In certain production processes, chemical, pharmaceutical and other industries need to use a large number of substances in the gaseous state, these gaseous substances will be brought out at the same time like pollutants in the production process, if there is no recovery and treatment of these gases, it will cause great harm to the environment and human health. Therefore, the use of condensation recovery system can achieve the purpose of energy saving and environmental protection and reduce the pressure of environmental protection. The principle of the condensation recovery system is based on the heat transfer and phase change of the gas as it flows through the condensing pipes. When the gas flows in the pipeline, it will take away a lot of heat. When the temperature of the pipeline drops below its dew point, the water vapor in the gas will condense into liquid, thus realizing the recovery of the gas. For harmful pollutants such as chemicals, specific solutions are added to the condensation recovery system to eliminate their toxicity through chemical reactions.

YQWT acid and alkali waste gas scrubber tower (acid and alkali spray scrubber tower) is mainly used to deal with acid and alkali inorganic waste gas, Yiqing Environmental Protection Group sells scrubber tower equipment with horizontal scrubber tower, vertical scrubber tower two types. From the material point of view, mainly stainless steel, carbon steel, FRP fiberglass material and PP material.

Coupling catalytic system equipment adopts stainless steel fixed skid-mounted fully sealed structure, convenient installation, internal coating of stainless steel special anticorrosion materials, can be resistant to acid and alkali exhaust environment, long service life of the equipment, by the pre-treatment section, the coupling reaction device, the array of drawer-type module composition.

Hot room exhaust is a kind of exhaust method to discharge the pollutants and exhaust gases produced in the air inside the hot room to the outside, and usually adopts the fan to carry out the auxiliary exhaust. It is mainly used to filter the particles and harmful substances discharged from inside the hot room, and its main features include: In summary, the hot room exhaust high-efficiency filtration equipment is characterized by high efficiency, corrosion resistance, low resistance, easy cleaning and maintenance, and high reliability.